Day 87 In The Gulf:Leak Foils BP Effort to Choke Gusher With Cap

Photo Posted 07/15/2010

NEW ORLEANS — BP engineers working to choke the flow of oil into the Gulf of Mexico found a leak on a line attached to the side of the new well cap and were trying to fix it Thursday before attempting to stop the flow of crude.

BP said Wednesday evening it had isolated the leak and was repairing it before moving forward. It wasn’t clear how it would affect the timing of the operation, or whether oil continued to be slowly closed off into the cap.

Work started earlier Wednesday after a day-long hiatus to allay government fears that the disaster could be made worse by going forward with the tests to determine whether the temporary cap can withstand the pressure and contain the oil. It was the best hope yet of stopping the crude from streaming into the water for the first time since the April 20 explosion on the Deepwater Horizon rig that killed 11 people.

The process began with BP shutting off pipes that were funneling some of the oil to ships on the surface so the full force of the gusher went up into the cap. Then deep-sea robots began slowly closing, one at a time, three openings in the cap that let oil pass through. Ultimately, the flow of crude will be blocked entirely.

Photo Posted 07/11/2010 - Where Is The Leak?

All along, engineers were watching pressure readings to learn whether the well is intact. The first two valves shut off like a light switch, while the third works more like a dimmer and takes longer to close off. The leak was found in the line attached to the dimmer switch, but live video footage showed that oil previously spewing from other sources on the cap remained closed off.

Work started earlier Wednesday after a day-long hiatus to allay government fears that the disaster could be made worse by going forward with the tests to determine whether the temporary cap can withstand the pressure and contain the oil. It was the best hope yet of stopping the crude from streaming into the water for the first time since the April 20 explosion on the Deepwater Horizon rig.

The process began with BP shutting off pipes that were funneling some of the oil to ships on the surface so the full force of the gusher went up into the cap. Then deep-sea robots began slowly closing, one at a time, three openings in the cap that let oil pass through. Ultimately, the flow of crude will be blocked entirely.

Retired Coast Guard Adm. Thad Allen, the Obama administration’s point man on the disaster, said a committee of scientists and

07/14/2010 Close up of area just above current leak - where is the oil?

engineers will monitor the results and assess every six hours, and end the test after 48 hours to evaluate the findings.

“I was gung-ho for this test and I remain gung-ho for this test,” he said Wednesday.

If the cap works, it will enable BP to stop the oil from gushing into the sea, either by holding all the oil inside the well machinery like a stopper or, if the pressure is too great, channeling some through lines to as many as four collection ships.

The cap — a 75-ton metal stack of lines and valves — was lowered onto the well on Monday in hopes of either bottling up the oil inside the well machinery, or capturing it and funneling it to the surface. But before BP could test the equipment, the government intervened because of concerns about whether the buildup of pressure from the gushing oil could rupture the walls of the well and make the leak worse.

http://www.foxnews.com/us/2010/07/14/bp-begin-testing-new-cap-gulf-oil-leak/

Read the story of why the Obama Administration allowed oil to flow unchecked into the Gulf for two days here: DAY 86 In The Gulf: All Work Stopped On New Cap And Relief Wells – Oil Flows Unchecked Into Gulf

Update: 07/15/2010 –  The Oil Has Stopped!

BP: No oil leaking into Gulf from busted well

NEW ORLEANS – BP says oil from its broken well has stopped gushing into the Gulf of Mexico for the first time since April.

The announcement Thursday came after company officials said all valves had been shut on a new cap over the busted well in an experiment to stop the spill.

Kent Wells, a BP PLC vice president, said at a news briefing that oil stopped flowing into the water at 2:25 p.m. CDT.

http://news.yahoo.com/s/ap/20100715/ap_on_bi_ge/us_gulf_oil_spill

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: